文件操作 - CIM_SwitchPortSourceRoutingStatistics.mof

文件: /usr/share/mof/cimv2.43.0/Network/CIM_SwitchPortSourceRoutingStatistics.mof

编辑文件内容

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_SwitchPortSourceRoutingStatistics
// ==================================================================
   [Version ( "2.7.0" ), 
    UMLPackagePath ( "CIM::Network::SwitchingBridging" ), 
    Description ( 
       "Statistical information regarding a SwitchPort supporting "
       "source routing." )]
class CIM_SwitchPortSourceRoutingStatistics : CIM_SAPStatisticalInformation {

[Description ( 
          "The number of Specifically Routed frames, also referred "
          "to as Source Routed Frames, that have been received from "
          "the segment attached to the port." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSpecInFrames" }]
   uint32 SpecInFrames;

[Description ( 
          "The number of Specifically Routed frames, also referred "
          "to as Source Routed Frames, that the port has "
          "transmitted on its segment." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSpecOutFrames" }]
   uint32 SpecOutFrames;

[Description ( 
          "The number of All Paths Explorer frames, also referred "
          "to as All Routes Explorer frames, that have been "
          "received by the port from its segment." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortApeInFrames" }]
   uint32 ApeInFrames;

[Description ( 
          "The number of all Paths Explorer Frames, also referred "
          "to as All Routes Explorer frames, that have been "
          "transmitted by the port on its segment." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortApeOutFrames" }]
   uint32 ApeOutFrames;

[Description ( 
          "The number of spanning tree explorer frames that have "
          "been received by the port from its segment." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSteInFrames" }]
   uint32 SteInFrames;

[Description ( 
          "The number of spanning tree explorer frames that have "
          "been transmitted by the port on its segment." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSteOutFrames" }]
   uint32 SteOutFrames;

[Description ( 
          "The number of explorer frames that have been discarded "
          "by the port because the routing descriptor field "
          "contained an invalid adjacent segment value." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSegmentMismatchDiscards" }]
   uint32 SegmentMismatchDiscards;

[Description ( 
          "The number of frames that have been discarded by the "
          "port because the routing descriptor field contained a "
          "duplicate segment identifier." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortDuplicateSegmentDiscards" }]
   uint32 DuplicateSegmentDiscards;

[Description ( 
          "The number of explorer frames that have been discarded "
          "by the port because the Routing Information Field has "
          "exceeded the maximum route descriptor length." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortHopCountExceedsDiscards" }]
   uint32 HopCountExceedsDiscards;

[Description ( 
          "The number of duplicate LAN IDs or Tree errors. This "
          "helps in detection of problems in networks containing "
          "older Source Routing Bridges." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortDupLanIdOrTreeErrors" }]
   uint32 DupLanIdOrTreeErrors;

[Description ( 
          "The number of ARE and STE frames that were discarded "
          "because the last LAN ID in the routing information field "
          "did not equal the LAN-in ID. This error can occur in "
          "implementations which do only a LAN-in ID and Bridge "
          "Number check instead of a LAN-in ID, Bridge Number, and "
          "LAN-out ID check before they forward broadcast frames." ), 
       Counter, MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortLanIdMismatches" }]
   uint32 LanIdMismatches;

};

文件操作 - CIM_SwitchPortSourceRoutingStatistics.mof

文件: /usr/share/mof/cimv2.43.0/Network/CIM_SwitchPortSourceRoutingStatistics.mof

编辑文件内容

修改文件时间

删除文件